NAME

The GNI Fabric Provider

OVERVIEW

The GNI provider runs on Cray XC (TM) systems utilizing the user-space Generic Network Interface (uGNI) which provides low-level access to the Aries interconnect. The Aries interconnect is designed for low-latency one-sided messaging and also includes direct hardware support for common atomic operations and optimized collectives.

REQUIREMENTS

The GNI provider runs on Cray XC systems running CLE 5.2 UP04 or higher using gcc version 4.9 or higher.

SUPPORTED FEATURES

The GNI provider supports the following features defined for the libfabric API:

Endpoint types

The provider supports the FI_EP_RDM and FI_EP_DGRAM endpoint types.

Address vectors

The provider implements both the FI_AV_MAP and FI_AV_TABLE address vector types.

Memory registration modes

The provider implements the FI_MR_BASIC memory registration mode.

Data transfer operations

The following data transfer interfaces are supported for all endpoint types: FI_ATOMIC, FI_MSG, FI_RMA, FI_TAGGED. See DATA TRANSFER OPERATIONS below for more details.

Completion events

The GNI provider supports FI_CQ_FORMAT_CONTEXT, FI_CQ_FORMAT_MSG, FI_CQ_FORMAT_DATA and FI_CQ_FORMAT_TAGGED with wait objects of type FI_WAIT_NONE, FI_WAIT_FD, and FI_WAIT_MUTEX_COND.

Modes

The GNI provider does not require any operation modes.

Progress

For both control and data progress, the GNI provider supports both FI_PROGRESS_AUTO and FI_PROGRESS_MANUAL, with a default set to FI_PROGRESS_AUTO.

Additional Features

The GNI provider also supports the following capabilities and features:

FI_MULTI_RECV
FI_SOURCE
FI_FENCE
FI_RM_ENABLED
FABRIC_DIRECT compilation mode

DATA TRANSFER OPERATIONS

FI_ATOMIC

Currently, the GNI provider only supports atomic operations supported directly by the Aries NIC. These include operations on 32- and 64-bit, signed and unsigned integer and floating point values. Specifically,

Basic (fi_atomic, etc.)

FI_MIN, FI_MAX (no unsigned)
FI_SUM (no 64-bit floating point)
FI_BOR, FI_BAND, FI_BXOR (no floating point)
FI_ATOMIC_WRITE

Fetching (fi_fetch_atomic, etc.)

All of the basic operations as above
FI_ATOMIC_READ

Comparison (fi_compare_atomic, etc.)

FI_CSWAP
FI_MSWAP

FI_MSG

All FI_MSG operations are supported.

FI_RMA

All FI_RMA operations are supported.

FI_TAGGED

All FI_TAGGED operations are supported except fi_tinjectdata.

GNI EXTENSIONS

The GNI provider exposes low-level tuning parameters via a domain and endpoint fi_open_ops interface named FI_GNI_DOMAIN_OPS_1 and FI_GNI_EP_OPS_1. The flags parameter is currently ignored. The fi_open_ops function takes either a struct fi_gni_ops_domain or a struct fi_gni_ops_ep parameter and populates it with the following:

struct fi_gni_ops_domain {
	int (*set_val)(struct fid *fid, dom_ops_val_t t, void *val);
	int (*get_val)(struct fid *fid, dom_ops_val_t t, void *val);
};

struct fi_gni_ops_ep {
	int (*set_val)(struct fid *fid, dom_ops_val_t t, void *val);
	int (*get_val)(struct fid *fid, dom_ops_val_t t, void *val);
};

The set_val function sets the value of a given parameter; the get_val function returns the current value. For FI_GNI_DOMAIN_OPS_1, the currently supported values are:

GNI_MSG_RENDEZVOUS_THRESHOLD: Threshold message size at which a rendezvous protocol is used for FI_MSG data transfers. The value is of type uint32_t.
GNI_RMA_RDMA_THRESHOLD: Threshold message size at which RDMA is used for FI_RMA data transfers. The value is of type uint32_t.
GNI_CONN_TABLE_INITIAL_SIZE: Initial size of the internal table data structure used to manage connections. The value is of type uint32_t.
GNI_CONN_TABLE_MAX_SIZE: Maximum size of the internal table data structure used to manage connections. The value is of type uint32_t.
GNI_CONN_TABLE_STEP_SIZE: Step size for increasing the size of the internal table data structure used to manage internal GNI connections. The value is of type uint32_t.
GNI_VC_ID_TABLE_CAPACITY: Size of the virtual channel (VC) table used for managing remote connections. The value is of type uint32_t.
GNI_MBOX_PAGE_SIZE: Page size for GNI SMSG mailbox allocations. The value is of type uint32_t.
GNI_MBOX_NUM_PER_SLAB: Number of GNI SMSG mailboxes per allocation slab. The value is of type uint32_t.
GNI_MBOX_MAX_CREDIT: Maximum number of credits per GNI SMSG mailbox. The value is of type uint32_t.
GNI_MBOX_MSG_MAX_SIZE: Maximum size of GNI SMSG messages. The value is of type uint32_t.
GNI_RX_CQ_SIZE: Recommended GNI receive CQ size. The value is of type uint32_t.
GNI_TX_CQ_SIZE: Recommended GNI transmit CQ size. The value is of type uint32_t.
GNI_MAX_RETRANSMITS: Maximum number of message retransmits before failure. The value is of type uint32_t.
GNI_MR_CACHE_LAZY_DEREG: Enable or disable lazy deregistration of memory. The value is of type int32_t.
For FI_GNI_EP_OPS_1, the currently supported values are:
GNI_HASH_TAG_IMPL: Use a hashlist for the tag list implementation. The value is of type uint32_t.

fi_gni(7) Libfabric Programmer's Manual