NAME

fi_av - Address vector operations

fi_av_open / fi_close: Open or close an address vector
fi_av_bind: Associate an address vector with an event queue.
fi_av_insert / fi_av_insertsvc / fi_av_remove: Insert/remove an address into/from the address vector.
fi_av_lookup: Retrieve an address stored in the address vector.
fi_av_straddr: Convert an address into a printable string.
fi_av_insert_auth_key: Insert an authorization key into the address vector.
fi_av_lookup_auth_key: Retrieve an authorization key stored in the address vector.
fi_av_set_user_id: Set the user-defined fi_addr_t for an inserted fi_addr_t.

SYNOPSIS

#include <rdma/fi_domain.h>

int fi_av_open(struct fid_domain *domain, struct fi_av_attr *attr,
    struct fid_av **av, void *context);

int fi_close(struct fid *av);

int fi_av_bind(struct fid_av *av, struct fid *eq, uint64_t flags);

int fi_av_insert(struct fid_av *av, void *addr, size_t count,
    fi_addr_t *fi_addr, uint64_t flags, void *context);

int fi_av_insertsvc(struct fid_av *av, const char *node,
    const char *service, fi_addr_t *fi_addr, uint64_t flags,
    void *context);

int fi_av_insertsym(struct fid_av *av, const char *node,
    size_t nodecnt, const char *service, size_t svccnt,
    fi_addr_t *fi_addr, uint64_t flags, void *context);

int fi_av_remove(struct fid_av *av, fi_addr_t *fi_addr, size_t count,
    uint64_t flags);

int fi_av_lookup(struct fid_av *av, fi_addr_t fi_addr,
    void *addr, size_t *addrlen);

fi_addr_t fi_rx_addr(fi_addr_t fi_addr, int rx_index,
	  int rx_ctx_bits);

const char * fi_av_straddr(struct fid_av *av, const void *addr,
      char *buf, size_t *len);

int fi_av_insert_auth_key(struct fid_av *av, const void *auth_key,
      size_t auth_key_size, fi_addr_t *fi_addr, uint64_t flags);

int fi_av_lookup_auth_key(struct fid_av *av, fi_addr_t addr,
      void *auth_key, size_t *auth_key_size);

int fi_av_set_user_id(struct fid_av *av, fi_addr_t fi_addr,
      fi_addr_t user_id, uint64_t flags);

ARGUMENTS

domain: Resource domain
av: Address vector
eq: Event queue
attr: Address vector attributes
context: User specified context associated with the address vector or insert operation.
addr: Buffer containing one or more addresses to insert into address vector.
addrlen: On input, specifies size of addr buffer. On output, stores number of bytes written to addr buffer.
fi_addr: For insert, a reference to an array where returned fabric addresses will be written. For remove, one or more fabric addresses to remove. If FI_AV_USER_ID is requested, also used as input into insert calls to assign the user ID with the added address.
count: Number of addresses to insert/remove from an AV.
flags: Additional flags to apply to the operation.
auth_key: Buffer containing authorization key to be inserted into the address vector.
auth_key_size: On input, specifies size of auth_key buffer. On output, stores number of bytes written to auth_key buffer.
user_id: For address vectors configured with FI_AV_USER_ID, this defines the user ID to be associated with a specific fi_addr_t.

DESCRIPTION

Address vectors are used to map higher-level addresses, which may be more natural for an application to use, into fabric specific addresses. For example, an endpoint may be associated with a struct sockaddr_in address, indicating the endpoint is reachable using a TCP port number over an IPv4 address. This may hold even if the endpoint communicates using a proprietary network protocol. The purpose of the AV is to associate a higher-level address with a simpler, more efficient value that can be used by the libfabric API in a fabric agnostic way. The mapped address is of type fi_addr_t and is returned through an AV insertion call. The fi_addr_t is designed such that it may be a simple index into an array, a pointer to a structure, or a compact network address that may be placed directly into protocol headers.

The process of mapping an address is fabric and provider specific, but may involve lengthy address resolution and fabric management protocols. AV operations are synchronous by default, but may be set to operate asynchronously by specifying the FI_EVENT flag to fi_av_open. When requesting asynchronous operation, the application must first bind an event queue to the AV before inserting addresses. See the NOTES section for AV restrictions on duplicate addresses.

fi_av_open

fi_av_open allocates or opens an address vector. The properties and behavior of the address vector are defined by struct fi_av_attr.

struct fi_av_attr {
	enum fi_av_type  type;        /* type of AV */
	int              rx_ctx_bits; /* address bits to identify rx ctx */
	size_t           count;       /* # entries for AV */
	size_t           ep_per_node; /* # endpoints per fabric address */
	const char       *name;       /* system name of AV */
	void             *map_addr;   /* base mmap address */
	uint64_t         flags;       /* operation flags */
};

type: An AV type corresponds to a conceptual implementation of an address vector. The type specifies how an application views data stored in the AV, including how it may be accessed. Valid values are:

FI_AV_MAP

Addresses which are inserted into an AV are mapped to a native fabric address for use by the application. The use of FI_AV_MAP requires that an application store the returned fi_addr_t value that is associated with each inserted address. The advantage of using FI_AV_MAP is that the returned fi_addr_t value may contain encoded address data, which is immediately available when processing data transfer requests. This can eliminate or reduce the number of memory lookups needed when initiating a transfer. The disadvantage of FI_AV_MAP is the increase in memory usage needed to store the returned addresses. Addresses are stored in the AV using a provider specific mechanism, including, but not limited to a tree, hash table, or maintained on the heap.
FI_AV_TABLE

Addresses which are inserted into an AV of type FI_AV_TABLE are accessible using a simple index. Conceptually, the AV may be treated as an array of addresses, though the provider may implement the AV using a variety of mechanisms. When FI_AV_TABLE is used, the returned fi_addr_t is an index, with the index for an inserted address the same as its insertion order into the table. The index of the first address inserted into an FI_AV_TABLE will be 0, and successive insertions will be given sequential indices. Sequential indices will be assigned across insertion calls on the same AV.
FI_AV_UNSPEC

Provider will choose its preferred AV type. The AV type used will be returned through the type field in fi_av_attr.

Receive Context Bits (rx_ctx_bits)

The receive context bits field is only for use with scalable endpoints. It indicates the number of bits reserved in a returned fi_addr_t, which will be used to identify a specific target receive context. See fi_rx_addr() and fi_endpoint(3) for additional details on receive contexts. The requested number of bits should be selected such that 2 ^ rx_ctx_bits >= rx_ctx_cnt for the endpoint.

count

Indicates the expected number of addresses that will be inserted into the AV. The provider uses this to optimize resource allocations.

ep_per_node

This field indicates the number of endpoints that will be associated with a specific fabric, or network, address. If the number of endpoints per node is unknown, this value should be set to 0. The provider uses this value to optimize resource allocations. For example, distributed, parallel applications may set this to the number of processes allocated per node, times the number of endpoints each process will open.

name

An optional system name associated with the address vector to create or open. Address vectors may be shared across multiple processes which access the same named domain on the same node. The name field allows the underlying provider to identify a shared AV.

If the name field is non-NULL and the AV is not opened for read-only access, a named AV will be created, if it does not already exist.

map_addr

The map_addr determines the base fi_addr_t address that a provider should use when sharing an AV of type FI_AV_MAP between processes. Processes that provide the same value for map_addr to a shared AV may use the same fi_addr_t values returned from an fi_av_insert call.

The map_addr may be used by the provider to mmap memory allocated for a shared AV between processes; however, the provider is not required to use the map_addr in this fashion. The only requirement is that an fi_addr_t returned as part of an fi_av_insert call on one process is usable on another process which opens an AV of the same name at the same map_addr value. The relationship between the map_addr and any returned fi_addr_t is not defined.

If name is non-NULL and map_addr is 0, then the map_addr used by the provider will be returned through the attribute structure. The map_addr field is ignored if name is NULL.

flags

The following flags may be used when opening an AV.

FI_EVENT

When the flag FI_EVENT is specified, all insert operations on this AV will occur asynchronously. There will be one EQ error entry generated for each failed address insertion, followed by one non-error event indicating that the insertion operation has completed. There will always be one non-error completion event for each insert operation, even if all addresses fail. The context field in all completions will be the context specified to the insert call, and the data field in the final completion entry will report the number of addresses successfully inserted. If an error occurs during the asynchronous insertion, an error completion entry is returned (see fi_eq(3) for a discussion of the fi_eq_err_entry error completion struct). The context field of the error completion will be the context that was specified in the insert call; the data field will contain the index of the failed address. There will be one error completion returned for each address that fails to insert into the AV.

If an AV is opened with FI_EVENT, any insertions attempted before an EQ is bound to the AV will fail with -FI_ENOEQ.

Error completions for failed insertions will contain the index of the failed address in the index field of the error completion entry.

Note that the order of delivery of insert completions may not match the order in which the calls to fi_av_insert were made. The only guarantee is that all error completions for a given call to fi_av_insert will precede the single associated non-error completion.
FI_READ

Opens an AV for read-only access. An AV opened for read-only access must be named (name attribute specified), and the AV must exist.
FI_SYMMETRIC

Indicates that each node will be associated with the same number of endpoints, the same transport addresses will be allocated on each node, and the transport addresses will be sequential. This feature targets distributed applications on large fabrics and allows for highly-optimized storage of remote endpoint addressing.
FI_AV_USER_ID

Indicates that the user will be associating user-defined IDs with a address vector via fi_av_set_user_id. If the domain has been configured with FI_AV_AUTH_KEY or the user requires FI_AV_USER_ID support, using the FI_AV_USER_ID flag per fi_av_insert / fi_av_insertsvc / fi_av_remove is not supported. fi_av_set_user_id must be used.

fi_close

The fi_close call is used to release all resources associated with an address vector. Note that any events queued on an event queue referencing the AV are left untouched. It is recommended that callers retrieve all events associated with the AV before closing it.

When closing the address vector, there must be no opened endpoints associated with the AV. If resources are still associated with the AV when attempting to close, the call will return -FI_EBUSY.

fi_av_bind

Associates an event queue with the AV. If an AV has been opened with FI_EVENT, then an event queue must be bound to the AV before any insertion calls are attempted. Any calls to insert addresses before an event queue has been bound will fail with -FI_ENOEQ. Flags are reserved for future use and must be 0.

fi_av_insert

The fi_av_insert call inserts zero or more addresses into an AV. The number of addresses is specified through the count parameter. The addr parameter references an array of addresses to insert into the AV. Addresses inserted into an address vector must be in the same format as specified in the addr_format field of the fi_info struct provided when opening the corresponding domain. When using the FI_ADDR_STR format, the addr parameter should reference an array of strings (char **).

For AV’s of type FI_AV_MAP, once inserted addresses have been mapped, the mapped values are written into the buffer referenced by fi_addr. The fi_addr buffer must remain valid until the AV insertion has completed and an event has been generated to an associated event queue. The value of the returned fi_addr should be considered opaque by the application for AVs of type FI_AV_MAP. The returned value may point to an internal structure or a provider specific encoding of low-level addressing data, for example. In the latter case, use of FI_AV_MAP may be able to avoid memory references during data transfer operations.

For AV’s of type FI_AV_TABLE, addresses are placed into the table in order. An address is inserted at the lowest index that corresponds to an unused table location, with indices starting at 0. That is, the first address inserted may be referenced at index 0, the second at index 1, and so forth. When addresses are inserted into an AV table, the assigned fi_addr values will be simple indices corresponding to the entry into the table where the address was inserted. Index values accumulate across successive insert calls in the order the calls are made, not necessarily in the order the insertions complete.

Because insertions occur at a pre-determined index, the fi_addr parameter may be NULL. If fi_addr is non-NULL, it must reference an array of fi_addr_t, and the buffer must remain valid until the insertion operation completes. Note that if fi_addr is NULL and synchronous operation is requested without using FI_SYNC_ERR flag, individual insertion failures cannot be reported and the application must use other calls, such as fi_av_lookup to learn which specific addresses failed to insert. Since fi_av_remove is provider-specific, it is recommended that calls to fi_av_insert following a call to fi_av_remove always reference a valid buffer in the fi_addr parameter. Otherwise it may be difficult to determine what the next assigned index will be.

If the address vector is configured with authorization keys, the fi_addr parameter may be used as input to define the authorization keys associated with the endpoint addresses being inserted. This is done by setting the fi_addr to an authorization key fi_addr_t generated from fi_av_insert_auth_key and setting the FI_AUTH_KEY flag. If the FI_AUTH_KEY flag is not set, addresses being inserted will not be associated with any authorization keys. Whether or not an address can be disassociated with an authorization key is provider specific. If a provider cannot support this disassociation, an error will be returned. Upon successful insert with FI_AUTH_KEY flag, the returned fi_addr_t’s will map to endpoint address against the specified authorization keys. These fi_addr_t’s can be used as the target for local data transfer operations.

If the endpoint supports FI_DIRECTED_RECV, these fi_addr_t’s can be used to restrict receive buffers to a specific endpoint address and authorization key.

For address vectors configured with FI_AV_USER_ID, all subsequent target events corresponding to the address being inserted will return FI_ADDR_NOTAVAIL until the user defines a user ID for this fi_addr_t. This is done by using fi_av_set_user_id.

flags: The following flag may be passed to AV insertion calls: fi_av_insert, fi_av_insertsvc, or fi_av_insertsym.

FI_MORE

In order to allow optimized address insertion, the application may specify the FI_MORE flag to the insert call to give a hint to the provider that more insertion requests will follow, allowing the provider to aggregate insertion requests if desired. An application may make any number of insertion calls with FI_MORE set, provided that they are followed by an insertion call without FI_MORE. This signifies to the provider that the insertion list is complete. Providers are free to ignore FI_MORE.
FI_SYNC_ERR

This flag applies to synchronous insertions only, and is used to retrieve error details of failed insertions. If set, the context parameter of insertion calls references an array of integers, with context set to address of the first element of the array. The resulting status of attempting to insert each address will be written to the corresponding array location. Successful insertions will be updated to 0. Failures will contain a fabric errno code.
FI_AV_USER_ID

For address vectors configured without FI_AV_USER_ID specified, this flag associates a user-assigned identifier with each AV entry that is returned with any completion entry in place of the AV’s address. If a provider does not support FI_AV_USER_ID with insert, requesting this flag during insert will result runtime failure.

Using the FI_AV_USER_ID flag per insert is invalid if the AV was opened with the FI_AV_USER_ID or if the corresponding domain was configured with FI_AV_AUTH_KEY.

With libfabric 1.20, users are encouraged to specify the FI_AV_USER_ID when opening an AV and use fi_av_set_user_id.
FI_AUTH_KEY

Denotes that the address being inserted should be associated with the passed in authorization key fi_addr_t.

See the user ID section below.

fi_av_insertsvc

The fi_av_insertsvc call behaves similar to fi_av_insert, but allows the application to specify the node and service names, similar to the fi_getinfo inputs, rather than an encoded address. The node and service parameters are defined the same as fi_getinfo(3). Node should be a string that corresponds to a hostname or network address. The service string corresponds to a textual representation of a transport address. Applications may also pass in an FI_ADDR_STR formatted address as the node parameter. In such cases, the service parameter must be NULL. See fi_getinfo.3 for details on using FI_ADDR_STR. Supported flags are the same as for fi_av_insert.

fi_av_insertsym

fi_av_insertsym performs a symmetric insert that inserts a sequential range of nodes and/or service addresses into an AV. The svccnt parameter indicates the number of transport (endpoint) addresses to insert into the AV for each node address, with the service parameter specifying the starting transport address. Inserted transport addresses will be of the range {service, service + svccnt - 1}, inclusive. All service addresses for a node will be inserted before the next node is inserted.

The nodecnt parameter indicates the number of node (network) addresses to insert into the AV, with the node parameter specifying the starting node address. Inserted node addresses will be of the range {node, node + nodecnt - 1}, inclusive. If node is a non-numeric string, such as a hostname, it must contain a numeric suffix if nodecnt > 1.

As an example, if node = “10.1.1.1”, nodecnt = 2, service = “5000”, and svccnt = 2, the following addresses will be inserted into the AV in the order shown: 10.1.1.1:5000, 10.1.1.1:5001, 10.1.1.2:5000, 10.1.1.2:5001. If node were replaced by the hostname “host10”, the addresses would be: host10:5000, host10:5001, host11:5000, host11:5001.

The total number of inserted addresses will be nodecnt x svccnt.

Supported flags are the same as for fi_av_insert.

fi_av_remove

fi_av_remove removes a set of addresses from an address vector. All resources associated with the indicated addresses are released. The removed address - either the mapped address (in the case of FI_AV_MAP) or index (FI_AV_TABLE) - is invalid until it is returned again by a new fi_av_insert.

The behavior of operations in progress that reference the removed addresses is undefined.

The use of fi_av_remove is an optimization that applications may use to free memory allocated with addresses that will no longer be accessed. Inserted addresses are not required to be removed. fi_av_close will automatically cleanup any resources associated with addresses remaining in the AV when it is invoked.

If the address being removed came from fi_av_insert_auth_key, the address will only be removed if all endpoints, which have been enabled against the corresponding authorization key, have been closed. If all endpoints are not closed, -FI_EBUSY will be returned. In addition, the FI_AUTH_KEY flag must be set when removing an authorization key fi_addr_t.

flags: The following flags may be used when removing an AV entry.

FI_AUTH_KEY

Denotes that the fi_addr_t being removed is an authorization key fi_addr_t.

fi_av_lookup

This call returns the address stored in the address vector that corresponds to the given fi_addr. The returned address is the same format as those stored by the AV. On input, the addrlen parameter should indicate the size of the addr buffer. If the actual address is larger than what can fit into the buffer, it will be truncated. On output, addrlen is set to the size of the buffer needed to store the address, which may be larger than the input value.

fi_rx_addr

This function is used to convert an endpoint address, returned by fi_av_insert, into an address that specifies a target receive context. The specified fi_addr parameter must either be a value returned from fi_av_insert, in the case of FI_AV_MAP, or an index, in the case of FI_AV_TABLE. The value for rx_ctx_bits must match that specified in the AV attributes for the given address.

Connected endpoints that support multiple receive contexts, but are not associated with address vectors should specify FI_ADDR_NOTAVAIL for the fi_addr parameter.

fi_av_straddr

The fi_av_straddr function converts the provided address into a printable string. The specified address must be of the same format as those stored by the AV, though the address itself is not required to have been inserted. On input, the len parameter should specify the size of the buffer referenced by buf. On output, addrlen is set to the size of the buffer needed to store the address. This size may be larger than the input len. If the provided buffer is too small, the results will be truncated. fi_av_straddr returns a pointer to buf.

fi_av_insert_auth_key

This function associates authorization keys with an address vector. This requires the domain to be opened with FI_AV_AUTH_KEY. FI_AV_AUTH_KEY enables endpoints and memory regions to be associated with authorization keys from the address vector. This behavior enables a single endpoint or memory region to be associated with multiple authorization keys.

When endpoints or memory regions are enabled, they are configured with address vector authorization keys at that point in time. Later authorization key insertions will not propagate to already enabled endpoints and memory regions.

The auth_key and auth_key_size parameters are used to input the authorization key into the address vector. The structure of the authorization key is provider specific. If the auth_key_size does not align with provider specific structure, -FI_EINVAL will be returned.

The output of fi_av_insert_auth_key is an authorization key fi_addr_t handle representing all endpoint addresses against this specific authorization key. For all operations, including address vector, memory registration, and data transfers, which may accept an authorization key fi_addr_t as input, the FI_AUTH_KEY flag must be specified. Otherwise, the fi_addr_t will be treated as an fi_addr_t returned from the fi_av_insert and related functions.

For endpoints enabled with FI_DIRECTED_RECV, authorization key fi_addr_t’s can be used to restrict incoming messages to only endpoint addresses within the authorization key. This will require passing in the FI_AUTH_KEY flag to fi_recvmsg and fi_trecvmsg.

For domains enabled with FI_DIRECTED_RECV, authorization key fi_addr_t’s can be used to restrict memory region access to only endpoint addresses within the authorization key. This will require passing in the FI_AUTH_KEY flag to fi_mr_regattr.

These authorization key fi_addr_t’s can later be used an input for endpoint address insertion functions to generate an fi_addr_t for a specific endpoint address and authorization key. This will require passing in the FI_AUTH_KEY flag to fi_av_insert and related functions.

For address vectors configured with FI_AV_USER_ID and endpoints with FI_SOURCE_ERR, all subsequent FI_EADDRNOTAVAIL error events will return FI_ADDR_NOTAVAIL until the user defines a user ID for this authorization key fi_addr_t. This is done by using fi_av_set_user_id.

For address vectors configured without FI_AV_USER_ID and endpoints with FI_SOURCE_ERR, all subsequent FI_EADDRNOTAVAIL error events will return the authorization key fi_addr_t handle.

Flags are reserved for future use and must be 0.

fi_av_lookup_auth_key

This functions returns the authorization key associated with a fi_addr_t. Acceptable fi_addr_t’s input are the output of fi_av_insert_auth_key and AV address insertion functions. The returned authorization key is in a provider specific format. On input, the auth_key_size parameter should indicate the size of the auth_key buffer. If the actual authorization key is larger than what can fit into the buffer, it will be truncated. On output, auth_key_size is set to the size of the buffer needed to store the authorization key, which may be larger than the input value.

fi_av_set_user_id

If the address vector has been opened with FI_AV_USER_ID, this function defines the user ID for a specific fi_addr_t. By default, all fi_addr_t’s will be assigned the user ID FI_ADDR_NOTAVAIL.

flags: The following flag may be passed to AV set user id.

FI_AUTH_KEY

Denotes that the fi_addr fi_addr_t, for which the user ID is being set for, is an authorization key fi_addr_t.

NOTES

An AV should only store a single instance of an address. Attempting to insert a duplicate copy of the same address into an AV may result in undefined behavior, depending on the provider implementation. Providers are not required to check for duplicates, as doing so could incur significant overhead to the insertion process. For portability, applications may need to track which peer addresses have been inserted into a given AV in order to avoid duplicate entries. However, providers are required to support the removal, followed by the re-insertion of an address. Only duplicate insertions are restricted.

Providers may implement AV’s using a variety of mechanisms. Specifically, a provider may begin resolving inserted addresses as soon as they have been added to an AV, even if asynchronous operation has been specified. Similarly, a provider may lazily release resources from removed entries.

USER IDENTIFIERS FOR ADDRESSES

As described above, endpoint addresses authorization keys that are inserted into an AV are mapped to an fi_addr_t value. The endpoint address fi_addr_t is used in data transfer APIs to specify the destination of an outbound transfer, in receive APIs to indicate the source for an inbound transfer, and also in completion events to report the source address of inbound transfers. The authorization key fi_addr_t are used in receive and MR APIs to resource incoming operations to a specific authorization key, and also in completion error events if the endpoint is configured with FI_SOURCE_ERR. The FI_AV_USER_ID capability bit and flag provide a mechanism by which the fi_addr_t value reported by a completion success or error event is replaced with a user-specified value instead. This is useful for applications that need to map the source address to their own data structure.

Support for FI_AV_USER_ID is provider specific, as it may not be feasible for a provider to implement this support without significant overhead. For example, some providers may need to add a reverse lookup mechanism. This feature may be unavailable if shared AVs are requested, or negatively impact the per process memory footprint if implemented. For providers that do not support FI_AV_USER_ID, users may be able to trade off lookup processing with protocol overhead, by carrying source identification within a message header.

For address vectors opened without FI_AV_USER_ID, user-specified fi_addr_t values are provided as part of address insertion (e.g. fi_av_insert) through the fi_addr parameter. The fi_addr parameter acts as input/output in this case. When the FI_AV_USER_ID flag is passed to any of the insert calls, the caller must specify an fi_addr_t identifier value to associate with each address. The provider will record that identifier and use it where required as part of any completion event. Note that the output from the AV insertion call is unchanged. The provider will return an fi_addr_t value that maps to each address, and that value must be used for all data transfer operations.

For address vectors opened with FI_AV_USER_ID, fi_av_set_user_id is used to defined the user-specified fi_addr_t.

RETURN VALUES

Insertion calls, excluding fi_av_insert_auth_key, for an AV opened for synchronous operation will return the number of addresses that were successfully inserted. In the case of failure, the return value will be less than the number of addresses that was specified.

Insertion calls, excluding fi_av_insert_auth_key, for an AV opened for asynchronous operation (with FI_EVENT flag specified) will return FI_SUCCESS if the operation was successfully initiated. In the case of failure, a negative fabric errno will be returned. Providers are allowed to abort insertion operations in the case of an error. Addresses that are not inserted because they were aborted will fail with an error code of FI_ECANCELED.

In both the synchronous and asynchronous modes of operation, the fi_addr buffer associated with a failed or aborted insertion will be set to FI_ADDR_NOTAVAIL.

All other calls return FI_SUCCESS on success, or a negative value corresponding to fabric errno on error. Fabric errno values are defined in rdma/fi_errno.h.

fi_av(3) Libfabric Programmer's Manual