NAME

fi_psm - The PSM Fabric Provider

OVERVIEW

The psm provider runs over the PSM 1.x interface that is currently supported by the Intel TrueScale Fabric. PSM provides tag-matching message queue functions that are optimized for MPI implementations. PSM also has limited Active Message support, which is not officially published but is quite stable and well documented in the source code (part of the OFED release). The psm provider makes use of both the tag-matching message queue functions and the Active Message functions to support a variety of libfabric data transfer APIs, including tagged message queue, message queue, RMA, and atomic operations.

The psm provider can work with the psm2-compat library, which exposes a PSM 1.x interface over the Intel Omni-Path Fabric.

LIMITATIONS

The psm provider doesn’t support all the features defined in the libfabric API. Here are some of the limitations:

Endpoint types

Only support non-connection based types FI_DGRAM and FI_RDM

Endpoint capabilities

Endpoints can support any combination of data transfer capabilities FI_TAGGED, FI_MSG, FI_ATOMICS, and FI_RMA. These capabilities can be further refined by FI_SEND, FI_RECV, FI_READ, FI_WRITE, FI_REMOTE_READ, and FI_REMOTE_WRITE to limit the direction of operations. The limitation is that no two endpoints can have overlapping receive or RMA target capabilities in any of the above categories. For example it is fine to have two endpoints with FI_TAGGED | FI_SEND, one endpoint with FI_TAGGED | FI_RECV, one endpoint with FI_MSG, one endpoint with FI_RMA | FI_ATOMICS. But it is not allowed to have two endpoints with FI_TAGGED, or two endpoints with FI_RMA.

FI_MULTI_RECV is supported for non-tagged message queue only.

Other supported capabilities include FI_TRIGGER.

Modes

FI_CONTEXT is required for the FI_TAGGED and FI_MSG capabilities. That means, any request belonging to these two categories that generates a completion must pass as the operation context a valid pointer to type struct fi_context, and the space referenced by the pointer must remain untouched until the request has completed. If none of FI_TAGGED and FI_MSG is asked for, the FI_CONTEXT mode is not required.

Progress

The psm provider requires manual progress. The application is expected to call fi_cq_read or fi_cntr_read function from time to time when no other libfabric function is called to ensure progress is made in a timely manner. The provider does support auto progress mode. However, the performance can be significantly impacted if the application purely depends on the provider to make auto progress.

Unsupported features

These features are unsupported: connection management, scalable endpoint, passive endpoint, shared receive context, send/inject with immediate data.

RUNTIME PARAMETERS

The psm provider checks for the following environment variables:

FI_PSM_UUID

PSM requires that each job has a unique ID (UUID). All the processes in the same job need to use the same UUID in order to be able to talk to each other. The PSM reference manual advises to keep UUID unique to each job. In practice, it generally works fine to reuse UUID as long as (1) no two jobs with the same UUID are running at the same time; and (2) previous jobs with the same UUID have exited normally. If running into “resource busy” or “connection failure” issues with unknown reason, it is advisable to manually set the UUID to a value different from the default.

The default UUID is 0FFF0FFF-0000-0000-0000-0FFF0FFF0FFF.

FI_PSM_NAME_SERVER

The psm provider has a simple built-in name server that can be used to resolve an IP address or host name into a transport address needed by the fi_av_insert call. The main purpose of this name server is to allow simple client-server type applications (such as those in fabtests) to be written purely with libfabric, without using any out-of-band communication mechanism. For such applications, the server would run first to allow endpoints be created and registered with the name server, and then the client would call fi_getinfo with the node parameter set to the IP address or host name of the server. The resulting fi_info structure would have the transport address of the endpoint created by the server in the dest_addr field. Optionally the service parameter can be used in addition to node. Notice that the service number is interpreted by the provider and is not a TCP/IP port number.

The name server is on by default. It can be turned off by setting the variable to 0. This may save a small amount of resource since a separate thread is created when the name server is on.

The provider detects OpenMPI and MPICH runs and changes the default setting to off.

FI_PSM_TAGGED_RMA

The RMA functions are implemented on top of the PSM Active Message functions. The Active Message functions have limit on the size of data can be transferred in a single message. Large transfers can be divided into small chunks and be pipe-lined. However, the bandwidth is sub-optimal by doing this way.

The psm provider use PSM tag-matching message queue functions to achieve higher bandwidth for large size RMA. For this purpose, a bit is reserved from the tag space to separate the RMA traffic from the regular tagged message queue.

The option is on by default. To turn it off set the variable to 0.

FI_PSM_AM_MSG

The psm provider implements the non-tagged message queue over the PSM tag-matching message queue. One tag bit is reserved for this purpose. Alternatively, the non-tagged message queue can be implemented over Active Message. This experimental feature has slightly larger latency.

This option is off by default. To turn it on set the variable to 1.

FI_PSM_DELAY

Time (seconds) to sleep before closing PSM endpoints. This is a workaround for a bug in some versions of PSM library.

The default setting is 1.

FI_PSM_TIMEOUT

Timeout (seconds) for gracefully closing PSM endpoints. A forced closing will be issued if timeout expires.

The default setting is 5.

FI_PSM_PROG_INTERVAL

When auto progress is enabled (asked via the hints to fi_getinfo), a progress thread is created to make progress calls from time to time. This option set the interval (microseconds) between progress calls.

The default setting is 1 if affinity is set, or 1000 if not. See FI_PSM_PROG_AFFINITY.

FI_PSM_PROG_AFFINITY

When set, specify the set of CPU cores to set the progress thread affinity to. The format is <start>[:<end>[:<stride>]][,<start>[:<end>[:<stride>]]]*, where each triplet <start>:<end>:<stride> defines a block of core_ids. Both <start> and <end> can be either the core_id (when >=0) or core_id - num_cores (when <0).

By default affinity is not set.

SEE ALSO

fabric(7), fi_provider(7), fi_psm2(7), fi_psm3(7),